Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Enclave
    4. : How to replace the battery on the Buick Enclave.

Buick Enclave - Video tutorial

Model: Buick Enclave MK 1 - Years 2008-2017
Part: Battery
Operation: How to replace the battery on the Buick Enclave.

In the writing that follows, we have provided the procedure with a description of the necessary steps for the correct replacement. The battery on this car model is located inside the cabin under the floor behind the front seats. To access it, it is necessary to remove the upper cover, and underneath, we find the compartment that contains the battery. Proceed to disconnect the negative pole first and then the positive one. Then, remove the battery and replace it with the new one, then reconnect the positive pole first and then the negative one, and finally close the cover.


Posted on 27 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Enclave 2008-2017 - What causes the Buick Enclave battery problem? Read Answer
    • Enclave 2008-2017 - What's the problem with the Buick Enclave's battery? Read Answer
    • Enclave 2018-2025 - What are the symptoms of a dead battery on a Buick Enclave? Read Answer
    • Enclave 2018-2025 - What caused the Buick Enclave battery problem? Read Answer
    • Enclave 2008-2017 - What problems does the Buick Enclave battery have? Read Answer
    • Enclave 2008-2017 - What problems does the Buick Enclave battery have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos