Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Enclave
    4. : How to replace the battery of a Buick Enclave.

Buick Enclave - Video tutorial

Model: Buick Enclave MK 2 - Years 2018-2024
Part: Battery
Operation: How to replace the battery of a Buick Enclave.

Replacing the battery of the Buick Enclave only takes a few minutes, as you only need to disconnect the power cables and remove the battery from the engine compartment. First, open the vehicle's engine hood and start unscrewing the fastening screws of the battery's central bracket; then disconnect both battery terminals (positive and negative), in order to remove it from its compartment, as shown in the video. At this point, install the new suitable battery, of the right type and with the same amperage; remount the battery in its compartment, securing the terminals with the correct polarity.


Posted on 23 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Enclave 2008-2017 - What causes the Buick Enclave battery problem? Read Answer
    • Enclave 2008-2017 - What's the problem with the Buick Enclave's battery? Read Answer
    • Enclave 2018-2025 - What are the symptoms of a dead battery on a Buick Enclave? Read Answer
    • Enclave 2018-2025 - What caused the Buick Enclave battery problem? Read Answer
    • Enclave 2008-2017 - What problems does the Buick Enclave battery have? Read Answer
    • Enclave 2008-2017 - What problems does the Buick Enclave battery have? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos