Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Enclave
    4. : How to replace the battery in the Buick Enclave?

Buick Enclave - Video tutorial

Model: Buick Enclave MK 1 - Years 2008-2017
Part: Battery
Operation: How to replace the battery in the Buick Enclave?

The Buick Enclave's battery is located behind the passenger seat. We pull up to remove the first cover and then use a T20 torx wrench to remove the screw that holds the second cover in place and remove the latter as well. We are now in front of the battery: with a 10mm wrench we first remove the negative pole and then do the same thing with the positive pole. We disconnect the connector and the tube and, with a 13mm wrench, we also remove the bolt. We extract the exhausted battery, insert the new one and close everything by doing the procedure in reverse.


Posted on 25 May 2022 by ScegliAuto

    Frequently Asked Questions

    • Enclave 2008-2017 - What causes the Buick Enclave battery problem? Read Answer
    • Enclave 2008-2017 - What's the problem with the Buick Enclave's battery? Read Answer
    • Enclave 2018-2025 - What are the symptoms of a dead battery on a Buick Enclave? Read Answer
    • Enclave 2018-2025 - What caused the Buick Enclave battery problem? Read Answer
    • Enclave 2008-2017 - What problems does the Buick Enclave battery have? Read Answer
    • Enclave 2008-2017 - What problems does the Buick Enclave battery have? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos