Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Buick Enclave

Model: Buick Enclave MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the battery in a Buick Enclave, a very simple and quick operation. First, ensure that the key is not in the ignition for safety.

Then, open the right rear door, locate the cover behind the passenger seat, and remove it by unscrewing the single fastening bolt with a T20 Torx wrench. Next, disconnect both terminals, starting with the negative.

Unscrew the bolt of the lower bracket with a 13mm wrench and remove the battery from its housing. Finally, insert the replacement battery and reassemble everything.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Buick Enclave?
How to Replace the Remote Battery in a Buick Enclave?
Buick Enclave (2018-2025 / MK 2) As seen in this tutorial, replacing the remote battery in a Buick Enclave is an extremely simple and quick task. You won’t need any special tools, ju…
How to Replace the Remote Battery in a Buick Enclave?
How to Replace the Remote Battery in a Buick Enclave?
Buick Enclave (2018-2025 / MK 2) As you can see in this tutorial, replacing the remote battery in a Buick Enclave is an extremely simple and inexpensive operation. For this, you will…
How to Replace the Battery in a Buick Enclave?
How to Replace the Battery in a Buick Enclave?
Buick Enclave (2008-2017 / MK 1) The battery of the Buick Enclave is located behind the passenger seat. Pull up to remove the first cover, then use a T20 Torx wrench to remove the sc…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos