Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Regal
    4. : How to disassemble the front door panel of the Buick Regal.

Buick Regal - Video tutorial

Model: Buick Regal MK 5 - Years 2009-2017
Part: Door panel
Operation: How to disassemble the front door panel of the Buick Regal.

Today's instructions will show us how to disassemble and replace the front door panel of the Buick Regal. First, we open the front door and start removing the plastic cover of the handle by prying on the sides. Then, we unscrew the securing screws that we find underneath, also unscrewing the screw located on the opening handle and on the sides of the panel, as shown in the video. At this point, we pry on the sides to detach and remove it, disconnecting the electrical connector of the control panel and the handle cable that we find behind the panel!


Posted on 8 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos