Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

Removing the front door panel on a Chevrolet Captiva is a relatively easy task. First, open the door and, using a suitable screwdriver, remove the plastic cover that hides the screw, then unscrew the screw located in the handle housing.

Next, remove the chrome plastic trim that finishes the door handle with a suitable screwdriver, and unscrew the two screws located under the trim on the handle itself. At this point, unclip the panel from the clips holding it in place by pulling the panel, gripping it by the 'pocket' at the bottom, and then sliding it upwards.

Now you can disconnect the cable that connects the release lever to the lock, and you're done.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Chevrolet Captiva
Removing the Door Panel of the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In this video tutorial, you will see the steps to remove and replace the front door panel of the Chevrolet Captiva. First, open the front door and st…
How to Remove the Door Panel of a Chevrolet Captiva
How to Remove the Door Panel of a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) How do you remove the passenger side door panel on a Chevrolet Captiva? This video explains the procedure. Before starting the disassembly work, disc…
Modifying Headlights on Chevrolet Captiva
Modifying Headlights on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos