Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the trunk release button of the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Push button

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the opening and closing button of the rear trunk door of the Chevrolet Cruze. First of all, let's move to the back and start removing the rear trunk panel, removing the plastic clips; then we unscrew the button screws, disconnecting the electrical connector to remove the button, as shown in the video.

At this point we install the new button, first checking its operation; we reassemble everything, applying the reverse procedure!


Posted on 3 January 2025 by ScegliAuto


Related tutorials

How to open the trunk of the Chevrolet Cruze
How to open the trunk of the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) Opening the trunk of the Chevrolet Cruze is a very simple and quick operation. On this type of car, a button has been installed near the window switc…
How to Open the Boot on a Chevrolet Cruze
How to Open the Boot on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If the boot of your Chevrolet Cruze won't open, there is likely a fault with the boot release fuse. To resolve this issue, access the fuse box locate…
How to program the remote key for the Chevrolet Cruze
How to program the remote key for the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this guide, we will see the instructions that will allow us to program the remote control of the Chevrolet Cruze key. First, let's get inside the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos