Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the airbag light on the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Warning light – error code

In this guide, we will see the instructions that will allow us to reset the malfunction indicator light of the Chevrolet Cruze airbag, with error code B0020. In this case, the error is due to the malfunction of the front passenger airbag; to solve the problem, we will disconnect the electrical connector that we find at the bottom, always on the passenger side, as shown in the video. At this point, we reconnect the electrical connection of the front passenger airbag, turning on the instrument panel and verifying that the airbag light has been reset.

Posted on 2 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Airbag in a Chevrolet Cruze
Replacing the Airbag in a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Do you want to replace the airbag in your Chevrolet Cruze? Here’s how to remove the airbag from the steering wheel. Disconnect the battery terminals.…
Reset Airbag Light on Chevrolet Cruze
Reset Airbag Light on Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) In today's video tutorial, learn how to reset the airbag light on a first-generation Chevrolet Cruze. After resolving all issues related to the light…
How to dismantle the steering wheel in the Chevrolet Cruze?
How to dismantle the steering wheel in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial we can see how to disassemble the steering wheel in the Chevrolet Cruze, an extremely simple and quick operation. Before proceeding,…

    Frequently Asked Questions

    • Cruze 2009-2015 - What does the "Code 54" error mean in the Chevrolet Cruze? Read answer
    • Cruze 2009-2015 - What does code 89 mean in a Chevrolet Cruze? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos