Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn off the service light on the Chevrolet Aveo MK1

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Service warning light

In this video, we will see how to reset the Service light of a Chevrolet Aveo MK1: first of all, with all the doors, trunk, and front hood closed, turn on the ignition without starting the car engine. Now, press the accelerator pedal three times quickly and in sequence: it should not take more than 15 seconds. At this point, the light will start flashing. When it stops, it will turn off completely. Now, turn off the ignition and wait for a moment. Turn it back on and check. The light has been permanently turned off.

Posted on 2 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a 2009 Chevrolet Aveo
How to reset the service light on a 2009 Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) In this video, we see how to reset the service light on a 2009 Chevrolet Aveo, MK1: we turn on the instrument panel by turning the ignition key to po…
How do you reset the Service light on the Chevrolet Aveo?
How do you reset the Service light on the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) To reset the Service light on the Chevrolet Aveo, you need to insert the key into the ignition and turn it to position two to turn on the instrument …
How to Reset the Oil Warning Light on the Chevrolet Aveo
How to Reset the Oil Warning Light on the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) If you have just completed the regular service on your Chevrolet Aveo but the yellow warning light continues to stay on, you will need to perform a m…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos