|
Do it yourself
| |||
| ||||
How to Change the Diesel Filter on a Chevrolet Captiva
Model: Chevrolet Captiva
MK 1
- Years 2006-2018
Lift the car on a column lift, locate the diesel filter (as shown in the video). Use a socket spanner to undo the large securing bolt of the container (disconnect the wires and various hoses from the filter) where the diesel filter is situated. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, refit the filter to the associated container in the vehicle (connect the hoses and wires) and tighten the appropriate bolts. Close the bonnet after maintenance.
Updated on 8 March 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Chevrolet Captiva
(2006-2018 /
MK 1)
In this video, you will see where the fuel filter is located on the Chevrolet Captiva and how to proceed if you need to replace it, a very simple and…
Chevrolet Captiva
(2006-2018 /
MK 1)
To replace the fuel pump on a Chevrolet Captiva, remove the rear seats as the pump is located beneath them. To access the pump, lift the carpet and l…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.109
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |