Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Tail light

Need to replace a broken rear light on a Chevrolet Aveo? Here's how to fit the new light. Open the boot lid, unscrew the securing screws located at the side of the light (right). Detach the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the bulbs if they are damaged (same size and voltage). Finally, reassemble the light, connect the power connectors, and screw the screws back in. Test the correct operation of the previously fitted bulbs. Start the vehicle and turn on the lights.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Rear Light on Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Replacing the damaged rear light on a Chevrolet Aveo? Remove the broken light and fit a new one. Lift the boot lid, unscrew the securing screws on th…
How to Remove the Rear Bumper of the Chevrolet Aveo?
How to Remove the Rear Bumper of the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) To remove the rear bumper of the Chevrolet Aveo, open the boot and loosen the screws located just below the seal and next to the rear lights. Next, l…
How to Remove the Front Headlight on Chevrolet Aveo
How to Remove the Front Headlight on Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) How to remove the front headlight on a Chevrolet Aveo. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos