Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Chevrolet Kalos MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight bulb

Video tutorial

To replace the front headlamp bulb, it is necessary to remove the headlamp itself: open the front bonnet and start by removing the front mask secured with two screws. Next, unscrew the screws securing the headlamp (one side and two top), remove it from its housing by pulling it forward and disconnecting the connector attached to it. Detach the rubber protective cap from the bulb holder, then the retaining spring of the bulb, and extract the bulb to replace it with the new one; then reattach the spring and cap, and reposition the headlamp in its housing, tightening the securing screws.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Remove Rear Light on Chevrolet Kalos
Remove Rear Light on Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) Is the rear light of your Chevrolet Kalos broken? Here’s how to remove it from inside the rear bodywork. Open the rear boot. Locate the screws that s…
Engine Air Filter Replacement
Engine Air Filter Replacement
Chevrolet Kalos (2002-2008 / MK 1) Replacing the engine air filter is extremely simple and does not require special precautions. Open the front bonnet and locate the engine air filter …
Replacing Front Brake Pads
Replacing Front Brake Pads
Chevrolet Kalos (2002-2008 / MK 1) To replace the front brake pads, lift the vehicle on suitable axle stands and remove the front wheel. At this point, do not remove the entire brake c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos