Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Arm on a Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

In today's video, you will see how to remove and replace the front wiper arm on a Chevrolet Aveo, as well as on the Spark and Matiz. First, open the bonnet of your car and unscrew the nut found on the wiper arm using a socket spanner; once removed, you can lift the wiper arm to take it off, along with the wiper blade.

At this point, you can replace it with the new one; position it and re-secure the nut with a ratchet spanner. Meanwhile, it is advisable to check the condition of the wiper blades (replace them if necessary)!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Hub Bearing on a Chevrolet Aveo?
How to Replace the Front Hub Bearing on a Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) In this tutorial, you will see how to replace the front hub bearing on a Chevrolet Aveo, a straightforward operation but one that requires good manua…
Where to Find the Fuses in the Chevrolet Aveo
Where to Find the Fuses in the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / MK 2, T300) Follow this procedure to locate the fuse box in your Chevrolet Aveo. First, get into the car and take your seat in the driver's position. Next, focus…
Where are the fuses located in the Chevrolet Aveo?
Where are the fuses located in the Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / MK 2, T300) The fuses of the Chevrolet Aveo are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it will b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos