Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Immobiliser on a Daewoo Matiz?

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Checks and maintenance

If the Daewoo Matiz won't start with the key, the immobiliser may be damaged. To start a car with this issue, you need to install a specific chip. This must be installed in the ECU: the ECU is located under the steering column, in the left front pillar. To access it, loosen the four screws that secure it. Once removed, open it and insert the chip inside, connecting it as shown in the video. Once finished, you can reassemble the ECU and connect it, confirming that the car can now be started.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on Your Daewoo Matiz
How to Replace the Timing Belt on Your Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) This video will teach you how to replace the old timing belt on your Daewoo Matiz with a new one. To facilitate the removal and replacement of the be…
Where are the Fuses Located in the Daewoo Matiz?
Where are the Fuses Located in the Daewoo Matiz?
Chevrolet Matiz (1998-2010 / MK 1) In this video, see the location of the fuse boxes and their respective diagrams in the Daewoo Matiz, useful if you need to check the fuse of a malfun…
How to Remove the Front Headlights on Daewoo - Chevrolet Matiz
How to Remove the Front Headlights on Daewoo - Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Today, we will go through the steps to remove the front headlights on a first-generation Daewoo or Chevrolet Matiz. First, open the front bonnet; the…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos