Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob and Gaiter on the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Shift knob

In this video, follow the steps to remove and replace the gear knob and gaiter on the first generation Chevrolet Cruze. First, get inside the vehicle and pry off the gaiter frame to detach it; then cut the clip that connects the gaiter to the knob, as shown in the video. At this point, pull the knob upwards with force to remove both the knob and gaiter; now simply replace everything, inserting a new clip between the gaiter and knob (to eliminate any play). Follow the video to the end!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob from a Chevrolet Cruze
How to Remove the Gear Knob from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Do you want to replace the gear knob on your Chevrolet Cruze? Let's see how to proceed. Use a plastic lever to detach the leather gaiter frame (if yo…
How to Remove Gear Knob on Cruze
How to Remove Gear Knob on Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) How do you remove the gear knob on the Chevrolet Cruze? Remove the knob to replace it or to change the leather gaiter covering the shaft. Hold the kn…
How to replace the gear shift knob of the Chevrolet Cruze.
How to replace the gear shift knob of the Chevrolet Cruze.
Chevrolet Cruze (2009-2015 / MK 1, J300) Today we will discover the instructions that will allow us to disassemble and remove the gear shift knob of the Chevrolet Cruze. First, let's get ins…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos