Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Silverado
  6. : How to disassemble the instrument cluster of the Chevrolet Silverado

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Instrument cluster
Operation: How to disassemble the instrument cluster of the Chevrolet Silverado

Today we will see, in this video tutorial, how to remove and replace the Chevrolet Silverado instrument cluster, following these simple steps. First we get on board the car and start by removing the instrument panel fairing, levering the sides; after which we unscrew the fixing screws of the panel, which we find on the sides of the same, as shown in the video. At this point we disconnect the electrical connector of the panel to remove it and replace it, if necessary, with the new one; now we can reassemble everything, applying the reverse procedure of disassembly!


Posted on 19 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos