Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chevrolet Colorado

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

This guide shows how to remove and replace the battery on the Chevrolet Colorado, following the instructions below. First, open the hood of your car and start unscrewing the nuts on both battery terminals (positive and negative); then unscrew the nuts of the central mounting bracket to completely remove the battery, as shown in the video.

At this point, replace the battery with a new one of the correct type and the same amperage; make the electrical connection and secure the central bracket with the two nuts!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Replace the Front Bumper Grille on the Chevrolet Colorado
Replace the Front Bumper Grille on the Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) In today's tutorial video, you will learn how to remove and replace the front bumper grille on the Chevrolet Colorado in simple and quick steps. Firs…
How to Replace the Air Filter on a Chevrolet Colorado
How to Replace the Air Filter on a Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) To replace the air filter on a Chevrolet Colorado, open the hood to access the components inside the engine compartment. On the left side of the engi…
How to replace the headlight bulb of the Chevrolet Colorado 2
How to replace the headlight bulb of the Chevrolet Colorado 2
Chevrolet Colorado (2015-2022 / MK 2) If you are looking for a simple and effective guide that helps you step by step in replacing the headlight bulb of your second generation Chevrolet C…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos