Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reducing Diesel Emissions with AdBlue

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: AdBlue warning light

See other generations:
This video is currently unavailable

This video shows how to mix diesel with AdBlue liquid. AdBlue is used to reduce nitrogen oxide emissions from the exhaust produced by your car. The solution is non-toxic and non-flammable, but it should be used carefully and in the correct doses as it contains elements like calcium that, in excess, could damage the injectors and the catalyst.

The product is usually placed in a dedicated tank and must be stored at temperatures between -10°C and 30°C. In this case, it is diluted in a special container located in the boot with a dose specified by the manufacturer.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to reset the AdBlue warning light in the Chevrolet Cruze?
How to reset the AdBlue warning light in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) If the AdBlue warning light has illuminated on the dashboard of your Chevrolet Cruze, it means that the fluid in the emission control system has reac…
How to Reset the AdBlue Warning Light on a Chevrolet Cruze?
How to Reset the AdBlue Warning Light on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) If the AdBlue warning light on your Chevrolet Cruze has illuminated, it means the fluid in the emissions system has reached the minimum level and nee…
How to refill AdBlue on the Chevrolet Cruze
How to refill AdBlue on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this short guide, we will see the instructions that will allow us to top up the AdBlue liquid of the Chevrolet Cruze. First, we open the rear hatc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos