Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Volt
    4. : How to replace the key battery of the Chevrolet Volt

Chevrolet Volt - Video tutorial

Model: Chevrolet Volt MK 1 - Years 2011-2019
Part: Key
Operation: How to replace the key battery of the Chevrolet Volt

If you need to replace the battery inside the key of your Chevrolet Volt but you don't know how to do it then just follow the instructions described in our new guide. First you have to remove the back of the cover and to do this you just need to insert a coin or a small flat screwdriver inside the slot. Then proceed with the removal of the exhausted button battery and insert the new one paying attention to the full compatibility of the latter. Finally, replace the back cover removed earlier and you are done.


Posted on 28 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos