Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Key for the Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

Programming a new key for the Chevrolet Equinox takes just over 30 minutes but is not difficult to perform. By doing it ourselves, we can save money that we would otherwise spend asking for a new key at a dealership or specialized shop.

Here’s how to do it. Get in the vehicle, close the doors, insert the new key into the ignition cylinder, and turn on the instrument panel. Wait 10 minutes, then turn off the ignition, turn it back on, and wait another 10 minutes.

Repeat this process one more time, and you will have finished programming the key.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Program a New Remote for the Chevrolet Equinox?
How to Program a New Remote for the Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) In this tutorial, you will see how to program a new remote for the Chevrolet Equinox, a very simple and quick operation. To do this, you will need a …
How to Replace the Starter Motor in a Chevrolet Equinox
How to Replace the Starter Motor in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, discover how to disassemble and replace the starter motor in a Chevrolet Equinox. First, open the hood of your vehicle and disconnect …
How to replace the starter motor of the Chevrolet Equinox 3.4L V6
How to replace the starter motor of the Chevrolet Equinox 3.4L V6
Chevrolet Equinox (2005-2009 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Chevrolet Equinox 3.4L V6. First, we o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos