Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Chevrolet Equinox 3.4L V6

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Starter motor

Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Chevrolet Equinox 3.4L V6. First, we open the hood of the car and start by disconnecting the battery terminals; then we lift the car and locate the starter motor, located next to the oil filter, as shown in the video. At this point, we disconnect the electrical wiring of the starter motor and unscrew its fixing screws to remove it and replace it with the new original one, following the video tutorial until the end!

Posted on 2 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor in a Chevrolet Equinox
How to Replace the Starter Motor in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, discover how to disassemble and replace the starter motor in a Chevrolet Equinox. First, open the hood of your vehicle and disconnect …
How to Replace the Windshield Wiper Blades on a Chevrolet Equinox
How to Replace the Windshield Wiper Blades on a Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) To replace the windshield wiper blades on a Chevrolet Equinox, lift the wiper arms so that they are not in direct contact with the windshield. Next, …
Oil light reset on a Chevrolet Equinox
Oil light reset on a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) Today we will see how to reset the oil change light on a third generation Chevrolet Equinox. So let's start the procedure by starting the engine, the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos