Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery in the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Battery

Discover how to remove and replace the battery in the Chevrolet Equinox by following the instructions below. First, open the hood and start by removing the plastic battery cover. Next, disconnect both battery terminals (positive and negative) using a 10 mm socket wrench. At this point, unscrew the battery hold-down bracket to remove the battery from the compartment. Replace it with a new one that has the same dimensions and amperage as the original.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Equinox (2010-2017 / MK 2) Replacing the remote battery for the Chevrolet Equinox is a very simple and inexpensive task. Let's see how to proceed in this tutorial. You won't ne…
Chevrolet Equinox (2010-2017 / MK 2) To replace the battery in a Chevrolet Equinox, open the hood to access the engine compartment and locate the battery, which is positioned near the le…
Chevrolet Equinox (2010-2017 / MK 2) To replace the battery in a Chevrolet Equinox, open the hood to access the engine compartment and locate the battery cover near the left front headli…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos