Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter in a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Oil filter

To replace the oil filter in a Chevrolet Equinox, open the hood to access the engine compartment. The part to be replaced is located at the front of the engine block, at the bottom. To replace the oil filter, loosen the bolt located on the top of the filter so that it can be removed from its housing. Once the old filter is removed, install a new one, securing it with its bolt and checking that the entire system is functioning properly.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in a Chevrolet Equinox?
How to Replace the Cabin Filter in a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the cabin filter in a Chevrolet Equinox, open the glove compartment located on the passenger side to disengage its internal mounting pins.…
Replacing the Air Filter on the Chevrolet Equinox
Replacing the Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial, you will learn how to remove and replace the engine air filter on the Chevrolet Equinox, following the instructions below. Fi…
Replacing the Cabin Air Filter on the Chevrolet Equinox
Replacing the Cabin Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide shows you how to remove and replace the cabin air filter on the Chevrolet Equinox. First, get inside the vehicle on the passenger side and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos