Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How to replace the cabin filter in the Chevrolet Equinox?

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 3 - Years 2018-2024
Part: Cabin air filter
Operation: How to replace the cabin filter in the Chevrolet Equinox?

In this video we can see how to replace the cabin filter in the Chevrolet Equinox, a very simple and fast operation. The filter is positioned behind the glove compartment on the passenger side, so let's start by opening the passenger compartment and disconnecting the shock absorber on the right. Once this is done, we place the drawer on the ground. At this point we will have gained access to the filter door, let's open it and replace it, taking care to insert it in the right direction. Finally, we reposition the door and the drawer by simply following the reverse procedure.


Posted on 20 August 2022 by ScegliAuto



Replacing the cabin air filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, let's see how to disassemble and replace the Chevrolet Equinox cabin air filter. First of all, we get on board the car, on the passeng
How do you replace the cabin filter on the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In order to replace the cabin filter of the Chevrolet Equinox, you need to open the glove box located on the front passenger side, so that its intern
How to replace the cabin filter on the Chevrolet Equinox
Chevrolet Equinox (2018-2024 / MK 3) To replace the cabin filter of the chevrolet Equinox, you must first open the glove compartment (Passenger side). Open this drawer, working on the si

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos