Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover and Cylinder Head Gasket on the Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010

This guide outlines the main steps to remove and replace the rocker cover and cylinder head gasket on the Chevrolet Matiz. First, open the bonnet and start by removing the cylinder head cover; disconnect the electrical connectors and remove the spark plugs, then undo all the screws of the cover. Once the rocker cover is removed, you can take off the cylinder head and replace the gasket; now disconnect the various pipes, including the coolant hose. Reassemble everything, replacing the rocker cover gasket.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

The Causes of Excess Smoke from the Chevrolet Matiz
The Causes of Excess Smoke from the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this video, see how the YouTuber identified various reasons why the Chevrolet Matiz was producing so much smoke. Firstly, it was due to the fact t…
Replacing the Fuel Pump on the Chevrolet Matiz
Replacing the Fuel Pump on the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) This guide shows you how to remove and replace the fuel pump on the second series Chevrolet Matiz. First, access the rear of the vehicle and start by…
Replace the Battery on Chevrolet Matiz
Replace the Battery on Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Replacing a faulty battery on a Chevrolet Matiz? Remove the battery from the engine bay. Open the car door and pull up the engine compartment release…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos