|
Do it yourself
| |||
| ||||
The Causes of Excess Smoke from the Chevrolet Matiz
Model: Chevrolet Matiz
MK 1
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Video tutorial
In this video, see how the YouTuber identified various reasons why the Chevrolet Matiz was producing so much smoke. Firstly, it was due to the fact that, being a dual-fuel vehicle (petrol/LPG), the previous owner had neglected maintenance (as often happens with these dual-fuel systems). A problem was then found with the cylinder head, necessitating the replacement of not only the gasket but the entire head, sourced from a used parts supplier. Since the car continued to emit a lot of black smoke, it was ultimately discovered that the issue was with the catalytic converter, which contained some truly terrible contaminants. Once cleaned, the vehicle returned to proper functioning: these are the main reasons for the smoke emitted from the exhaust.
Updated on 6 September 2026 by ScegliAuto
Related tutorials
Chevrolet Matiz
(1998-2010 /
MK 1)
The fuses for the Chevrolet Matiz are contained within two fuse boxes installed in the vehicle. The first box is located in the lower left part of th…
Chevrolet Matiz
(1998-2010 /
MK 1)
The fuses for the Chevrolet Matiz are located inside the appropriate fuse boxes within the vehicle: one is in the cabin and the other in the engine c…
Chevrolet Matiz
(1998-2010 /
MK 1)
Before you can start, sit in the front passenger seat of your Chevrolet Matiz. Begin by prying off and removing the upper cover of the speaker. This …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |