Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Spark plugs

Start by disconnecting the bonnet from the lever and lifting it to secure with the prop rod. Remove the pipes next to the exhaust outlets using a suitable pliers. Once the coil is removed, unscrew the spark plug with a socket wrench. Repeat these steps for each cylinder. Proceed to install the new spark plugs, then retrace your steps for reassembling the components.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Chevrolet Matiz
How to Replace the Spark Plugs on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Begin by opening the front bonnet of the car to work freely. Next, disconnect the cables connected to the spark plugs, then unplug the respective con…
Replacing the Rocker Cover and Cylinder Head Gasket on the Chevrolet Matiz
Replacing the Rocker Cover and Cylinder Head Gasket on the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) This guide outlines the main steps to remove and replace the rocker cover and cylinder head gasket on the Chevrolet Matiz. First, open the bonnet and…
How to Replace the Air Filter on the Chevrolet - Daewoo Matiz
How to Replace the Air Filter on the Chevrolet - Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this video tutorial, we will see the steps to dismantle and replace the engine air filter on the Chevrolet or Daewoo Matiz. First, open the bonnet…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos