Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Chevrolet Aveo

Model: Chevrolet Aveo MK 2, T300 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuel filter

See other generations:
Video tutorial

In this video tutorial, see how to replace the fuel filter on a Chevrolet Aveo by following some simple steps: first, purchase a new fuel filter from an authorised dealer. Next, get inside the vehicle, turn off the engine, and pull the handbrake.

The fuel filter on this vehicle is located at the rear on the right side, so lift the car using a jack and place safety stands under the vehicle. Now, remove the terminal connected to the fuel filter; use a screwdriver to pry off the securing clip on the hose connected to the filter and disconnect the hose from the filter.

Do the same on the other side of the filter, being careful as fuel will spill out, so place a container under the filter to catch the fuel. Using an 8 mm spanner, remove the retaining nut of the fuel filter, and once the filter is removed, install the new filter in its place and reassemble all parts in reverse order.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Chevrolet Aveo?
How to Replace the Fuel Filter on a Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / MK 2, T300) To replace the fuel filter on a Chevrolet Aveo, access the underside of the vehicle near the left rear wheel: here you will locate the filter, which …
How to Replace the Cabin Filter in a Chevrolet Aveo
How to Replace the Cabin Filter in a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) This video tutorial shows how to replace the cabin filter in a Chevrolet Aveo by following some essential steps. The cabin filter filters the air com…
Where to Find the Fuses in the Chevrolet Aveo
Where to Find the Fuses in the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / MK 2, T300) Follow this procedure to locate the fuse box in your Chevrolet Aveo. First, get into the car and take your seat in the driver's position. Next, focus…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos