Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Chevrolet Blazer

Model: Chevrolet Blazer MK 1 - Years 2019-2026
Part: Key

To replace the battery of the key fob for a Chevrolet Blazer, you will only need a small flathead screwdriver and a new battery, specifically a flat CR 2032 model rated at 3V. First, extract the metal key located inside the fob: press the small button on the side edge of the casing and simultaneously pull out the key. Next, insert the tip of the key into the empty cavity and lever it to open the fob; then use the screwdriver tip to pry the battery out. Finally, replace the old battery with the new one.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Chevrolet Blazer?
How to Replace the Remote Battery in the Chevrolet Blazer?
Chevrolet Blazer (2019-2026 / MK 1) This guide outlines all the steps you need to follow to replace the remote battery in your second generation Chevrolet Blazer. Before starting, purch…
How to Replace the Remote Battery of the Chevrolet Blazer?
How to Replace the Remote Battery of the Chevrolet Blazer?
Chevrolet Blazer (2019-2026 / MK 1) In this tutorial, see how to replace the remote battery of the Chevrolet Blazer, a very simple and quick operation. You will need a small flat-head s…
How to replace the battery of the Chevrolet Blazer
Chevrolet Blazer (2019-2026 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the battery of the Chevrolet Blazer. First of all, we open t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos