Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Cruze
    4. : How to reset the 2012 Chevrolet Cruze service light

Chevrolet Cruze - Video tutorial

Model: Chevrolet Cruze J300, MK 1 - Years 2009-2015
Part: Instrument cluster
Operation: How to reset the 2012 Chevrolet Cruze service light

If you have just done an oil change on your 2012 Chevrolet Cruze and want to get rid of the oil warning light then this guide is all you need. Indeed, we are going to describe the necessary steps to carry out the manual reset of the spy. First insert the key, turn it to position two and turn on the instrument panel. Immediately afterwards, press the "Menu" button located on the left-hand stalk of the steering wheel and navigate through it until you find the item relating to the remaining oil life. Finally, hold down the "Set/CLR" button for a few seconds and release it as soon as the reset is complete.


Posted on 7 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Cruze 2009-2015 - What does it mean when the code 89 lights up on the Chevrolet Cruze? Read Answer
    • Cruze 2009-2015 - What does Code 84 on the Chevrolet Cruze stand for? Read Answer
    • Cruze 2009-2015 - What does the code 54 mean in the Chevrolet Cruze? Read Answer
    • Cruze 2009-2015 - What does the Chevrolet Cruze Error Code 89 mean? Read Answer
    • Cruze 2009-2015 - What does the Chevrolet Cruze Error Code 84 mean? Read Answer
    • Cruze 2009-2015 - What does the error code 128 of a Chevrolet Cruze correspond to? Read Answer
    • Cruze 2009-2015 - What does the error code 82 mean on the Chevrolet Cruze? Read Answer
    • Cruze 2009-2015 - What does the Chevrolet Cruze error code 84 mean? Read Answer
    • Cruze 2009-2015 - What does the error code 89 mean on the Chevrolet Cruze? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos