Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil and Filter on the Chevrolet Volt

Model: Chevrolet Volt MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

Video tutorial

To replace the engine oil and filter on this car model, refer to the images in the video and read the instructions below, which summarise all the necessary steps for the replacement. After opening the bonnet and raising the vehicle, locate the oil drain plug under the oil sump.

Unscrew the plug, ensuring you have a container for the oil placed on the floor. Next, locate the oil filter and unscrew it using the appropriate spanner.

Take the new filter and screw it in after replacing the gasket. Return to the engine bay to fill the system with new oil.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Chevrolet Volt (2011-2019 / MK 1) If you need to replace the battery inside your Chevrolet Volt key but don't know how, simply follow the instructions outlined in this new guide. Firs…
Chevrolet Volt (2011-2019 / MK 1) To replace the front headlamp bulb on a Chevrolet Volt, open the bonnet to access the components inside the engine bay. Here, locate the circular pro…
Chevrolet Volt (2011-2019 / MK 1) If the central locking system of your Chevrolet Volt suddenly stops working, first check the status of the fuse for the control module, which is loca…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos