Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door of the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car door

See other generations:
Video tutorial

In today's video tutorial, we will see the steps to remove and replace the front door of the Chevrolet Cruze. First, open the front door and start by removing the rubber near the hinge; then disconnect the electrical connector found inside, as shown in the video.

At this point, unscrew the fixing screws of the hinges to definitively remove the door; then install the new one, reconnecting the electrical connection and adjusting the hinges so that the door closes properly!


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Door Lock Actuator on a Chevrolet Cruze
How to Replace the Door Lock Actuator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) These simple steps will allow you to remove and replace the door lock actuator on the front door of a Chevrolet Cruze. First, open the front door of …
Removing the Door Panel of the Chevrolet Cruze
Removing the Door Panel of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below is the procedure to remove and replace the front door panel of the Chevrolet Cruze. First, open the front door and start by removing the plasti…
Replacing the External Door Handle of the Chevrolet Cruze
Replacing the External Door Handle of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The instructions in this guide will allow you to disassemble and replace the external door handle of the front door of the Chevrolet Cruze. First, op…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos