Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Change Light on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Warning light – error code

This video tutorial demonstrates how to reset the oil change light on a Chevrolet Cruze, first generation, produced from 2009 to 2015. First, turn on the vehicle's ignition without starting the engine. Next, press the "MENU" button located on the left stalk until the display shows the remaining oil life. Once displayed, press the "SET/CLR" button at the end of the left stalk to perform the reset, and finally confirm the operation to complete the task.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Chevrolet Cruze
How to reset the oil light on the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) Today we will see how to reset the oil light after replacing it on a Chevrolet Cruze vehicle. Turn on the instrument panel and press the menu button …
What does the "Code 82" error indicate in the Chevrolet Cruze and how to remove it?
What does the "Code 82" error indicate in the Chevrolet Cruze and how to remove it?
Chevrolet Cruze (2009-2015 / MK 1, J300) If the message "Code 82" appears on the dashboard of your Chevrolet Cruze, it means it is time to change the oil and the associated filter as the pre…
Guide to replacing the gear knob of the Chevrolet Cruze
Guide to replacing the gear knob of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Today's guide will explain the steps on how to disassemble and replace the gear shift knob of the Chevrolet Cruze. First, we get into the car and sta…

    Frequently Asked Questions

    • Cruze 2009-2015 - What does the "Code 54" error mean in the Chevrolet Cruze? Read answer
    • Cruze 2009-2015 - What does code 89 mean in a Chevrolet Cruze? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos