Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for a Chevrolet?

Model: Chevrolet Chevrolet Various
Part: Key

Video tutorial

This tutorial shows how to program a new remote for a Chevrolet, a very simple and quick operation. To do this, you will obviously need a working key. Start by entering the cabin and inserting the key into the ignition switch, then press and hold the door unlock button located on the driver's side.

At the same time, turn the ignition on and off twice consecutively, then release the button and press and hold the lock and unlock buttons on the new remote for 20 seconds. At this point, open and close the door, turn on the ignition, and check that the operation has been successful.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Key Cover on a Chevrolet
How to Replace the Remote Key Cover on a Chevrolet
Chevrolet Chevrolet Various In this tutorial, learn how to replace the remote key cover on a Chevrolet vehicle, a very simple and quick operation. First, retrieve the old remote…
How to Replace the Remote Battery on the Chevrolet Silverado?
How to Replace the Remote Battery on the Chevrolet Silverado?
Chevrolet Chevrolet Various In this tutorial, you will see how to replace the remote battery on the Chevrolet Silverado, a very simple and quick operation. You will need a small…
What Does Code 89 Mean on a Chevrolet Tracker?
What Does Code 89 Mean on a Chevrolet Tracker?
Chevrolet Chevrolet Various Code 89 on a Chevrolet Tracker refers to the thermostat. If this code activates, it indicates a malfunction of the thermostat. To resolve this issue,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos