Do it yourself
Frequently asked questions about cars and motorcycles

Chrysler Pt Cruiser - Radiator

Chrysler Pt Cruiser (2000-2010 / MK 1)
How to replace the radiator in the Chrysler PT Cruiser?

In this tutorial we can see how to replace the radiator in the Chrysler PT Cruiser, a simple operation but that requires good manual skills. First of all, we …read all…
Posted on 14 April 2024 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
How to remove the radiator of a Chrysler Pt Cruiser

How to remove the radiator of a Chrysler Pt Cruiser. Let's open the bonnet and put it in safety; with a suitable socket wrench we go to disassemble the plate …read all…
Posted on 19 November 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
How to disassemble the cooling radiator on Chrysler Pt Cruiser

Let's see how to disassemble the cooling radiator on Chrysler Pt Cruiser. We open the engine hood, disassemble the front bumper (if necessary for disassembly …read all…
Posted on 15 November 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
Removing and replacing the radiator fan

This video shows us how to remove and replace the fan of our radiator. First we remove the rubber strip where the engine hood rests, then we disconnect the fan …read all…
Posted on 29 July 2023 by ScegliAuto

Shock absorbers (2) Air conditioning (1) Car stereo (2) Battery (1) Coil (1) Spark plugs (1) Key (1) Timing belt (4) V-belt (2) Checks and maintenance (2) Throttle body (1) Brake discs (1) Headlight (2) Tail light (1) Air filter (3) Oil filter (1) Grille (1) Headlight bulb (5) Antifreeze liquid (1) Engine (3) Window motor (1) Engine oil (3) Front bumper (1) Rear bumper (1) Pump (1) Fuel pump (1) Radiator (4) Fuse box (4) Drums and shoes (1) Windscreen wipers (1) Thermostat (2) Central tunnel (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos