Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chrysler
  4. :
  5. Pt Cruiser
  6. : Timing belt

Chrysler Pt Cruiser - Timing belt

Chrysler Pt Cruiser (2000-2010 / MK 1)
How do you replace the timing belt of the Chrysler PT Cruiser?

In order to replace the timing belt of the Chrysler PT Cruiser, you need to open the hood so that you can remove the plastic cover on the left side of the …read all…
Posted on 16 October 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
How to adjust the timing belt tensioner on the Chrysler Pt Cruiser

In this video we will show you how to adjust the timing belt tensioner of the Chrysler Pt Cruiser. To begin with, the engine must be at room temperature. Make …read all…
Posted on 19 November 2022 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
How to change the timing belt on a Pt Cruiser

Let's see how to change the timing belt of a Pt Cruiser. We lift the car onto a column bridge and remove the right front wheel; we disassemble the right stone …read all…
Posted on 24 November 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
Timing belt replacement

Replacing the timing belt is not the typical do-it-yourself maintenance since an installation mistake could seriously damage the engine; in any case, if you …read all…
Posted on 25 August 2023 by ScegliAuto

Shock absorbers (2) Air conditioning (1) Car stereo (2) Battery (1) Coil (1) Spark plugs (1) Key (1) Timing belt (4) V-belt (2) Checks and maintenance (2) Throttle body (1) Brake discs (1) Headlight (2) Tail light (1) Air filter (3) Oil filter (1) Grille (1) Headlight bulb (5) Antifreeze liquid (1) Engine (3) Window motor (1) Engine oil (3) Front bumper (1) Rear bumper (1) Pump (1) Fuel pump (1) Radiator (4) Fuse box (4) Drums and shoes (1) Windscreen wipers (1) Thermostat (2) Central tunnel (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos