Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. :
  3. Pt Cruiser
    4. : Headlight bulb

Chrysler Pt Cruiser - Headlight bulb

Chrysler Pt Cruiser (2000-2010 / MK 1)
Chrysler Pt Cruiser headlight bulb replacement
In today's video tutorial we will see how to remove and replace the headlight bulb of a Chrysler Pt Cruiser. First of all we must know that to access the bulb …read all…
Posted on 23 December 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
How to replace Chrysler Pt Cruiser headlight bulbs
As a first operation, unhook the hood from the special lever and lift it, now you will have to remove the bolts indicated in the video on the upper part of the …read all…
Posted on 29 September 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
Headlight bulb replacement
To replace the headlight bulb it is necessary to remove the headlight itself, which also requires disassembly of the front bumper: then open the front hood, …read all…
Posted on 16 August 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
Headlight bulb replacement
To access the headlight bulb, it is necessary to access the wheel arch: rotate the front wheel to the maximum in order to have more room for maneuver …read all…
Posted on 31 July 2023 by ScegliAuto
Chrysler Pt Cruiser (2000-2010 / MK 1)
Headlight bulb and headlight replacement
If possible, we recommend that you raise the car on a lift and remove the front wheel to facilitate removal. Along the wheel arch you can see a plug which must …read all…
Posted on 29 June 2023 by ScegliAuto
Shock absorbers (2) Air conditioning (1) Car stereo (2) Battery (1) Coil (1) Spark plugs (1) Key (1) Timing belt (4) V-belt (2) Checks and maintenance (2) Throttle body (1) Brake discs (1) Headlight (2) Tail light (1) Air filter (3) Oil filter (1) Grille (1) Headlight bulb (5) Antifreeze liquid (1) Engine (3) Window motor (1) Engine oil (3) Front bumper (1) Rear bumper (1) Pump (1) Fuel pump (1) Radiator (4) Fuse box (4) Drums and shoes (1) Windscreen wipers (1) Thermostat (2) Central tunnel (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos