Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the outside rearview mirror on the Chrysler Voyager?

Model: Chrysler Voyager MK 4 - Years 2000-2007
Part: Side mirror

In order to replace the rearview mirror of the Chrysler Voyager you have to pry a thin object to go and detach the outer cover that wraps the base of the mirror. Once this has been removed, it will be possible to access the screws below, which must all be loosened. By unscrewing these screws, it will be possible to detach the mirror from its housing on the door, disconnecting the connector underneath. In this way you can insert the new mirror, fixing it and connecting it appropriately to the connector.

Posted on 2 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…
How to replace the front headlight of the Chrysler Voyager.
How to replace the front headlight of the Chrysler Voyager.
Chrysler Voyager (2000-2007 / MK 4) Let's briefly see the instructions for disassembling and replacing the front headlight of the Chrysler Voyager. First, we open the car's engine hood …
How to replace the battery in the Chrysler Grand Voyager key
How to replace the battery in the Chrysler Grand Voyager key
Chrysler Voyager (2020-2026 / MK 6) If you intend to replace the coin cell battery inside the smart key of the new Chrysler Grand Voyager then this guide will remove any doubts about wh…

How to Clean the Injectors on BMW 3 Series

Let's see how to clean the injectors on BMW 3 Series with the appropriate cleaning kit. Lift the hood and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors. Connect the pressure gauge and the cleaning kit to the fuel lines; start running the cleaning fluid from the previously connected kit through the fuel lines of the injectors (repeat this process several times). Disconnect everything and start the engine. Reinstall the fuel line leading to the injectors after cleaning them of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos