Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Spark Plugs

Model: Chrysler Sebring St22, JR - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Spark plugs

See other generations:
Video tutorial

This video shows how to remove and replace the spark plugs in your car. First, locate where the spark plug leads are positioned; in this case, three are in a convenient and easily accessible position, while the other three are located under the intake manifold.

After replacing the first three spark plugs, to reach and replace the other three, you will need to remove the entire intake manifold; therefore, disconnect any hoses or connectors present on the intake manifold and proceed with its removal.

Once removed, disconnect the last three leads, unscrew the old spark plugs, and install the new ones.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Suspension Wishbone
Replacement of Front Suspension Wishbone
Chrysler Sebring (2000-2006 / St22, JR) To replace the front suspension wishbone, lift the vehicle on suitable axle stands and remove the front wheel; then extract the safety pin from the n…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Chrysler Sebring (2000-2006 / St22, JR) The cabin air filter is located on the passenger side, behind the glove compartment door: open the door and detach the side cable to fully swing it d…
Front Wheel Hub Bearing Replacement
Front Wheel Hub Bearing Replacement
Chrysler Sebring (2000-2006 / St22, JR) To repair the front wheel hub bearing, you need to replace the entire hub complete with bearing; therefore, lift the vehicle and remove the front whe…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos