Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Chrysler Sebring JR, St22 - Years 2000-2006
Part: Cabin air filter

The cabin air filter is located on the passenger side, behind the glove compartment door: open the door and detach the side cable to fully swing it down and access the air duct; unclip and remove the cap of the cabin air filter housing by opening the side tabs, extract the old filter, remove any dirt residue and insert the new one respecting the airflow direction (you can choose an activated carbon filter); then reposition the cap and the glove compartment door, securing the end stop cable.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the 2006 Chrysler Sebring?
Where is the fuse box located in the cabin of the 2006 Chrysler Sebring?
Chrysler Sebring (2000-2006 / JR, St22) If you want to be able to locate the fuse box in the cabin of your 2006 Chrysler Sebring on your own, just read the following guide and follow all th…
Instructions for Replacing the Timing Belt
Instructions for Replacing the Timing Belt
Chrysler Sebring (2000-2006 / JR, St22) Only perform the timing belt replacement if you have a good understanding of general mechanics, as an error in positioning the belt or securing any p…
Replacement of Front Suspension Wishbone
Replacement of Front Suspension Wishbone
Chrysler Sebring (2000-2006 / JR, St22) To replace the front suspension wishbone, lift the vehicle on suitable axle stands and remove the front wheel; then extract the safety pin from the n…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos