Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Uconnect in the Chrysler 200

Model: Chrysler 200 MK 1 - Years 2011-2014
Part: Warning light – error code

In today's video, we will see how to reset the Uconnect system in the Chrysler 200. This tutorial also applies to other models from the American manufacturer equipped with the same multimedia device. First, turn on your vehicle. Then, go to the center of the vehicle and turn on the radio. Scroll through the settings until you find the desired option. Confirm and proceed with resetting the corresponding parameter. Once done, you can turn off the radio and finish your current task. As you can see, this is a quick job.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Remove the Radio from a Chrysler 200?
How to Remove the Radio from a Chrysler 200?
Chrysler 200 (2011-2014 / MK 1) To remove the radio from a Chrysler 200, use a tool to pry off the trim that surrounds the device, which also includes the air vents. This will allow…
How to Replace the Cabin Filter in a Chrysler 200?
How to Replace the Cabin Filter in a Chrysler 200?
Chrysler 200 (2015-2017 / MK 2) To replace the cabin filter in a Chrysler 200, remove the plastic panel on the left side of the footwell on the passenger side. Once this panel is re…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos