Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Climate Control Buttons from the Chrysler 200?

Model: Chrysler 200 MK 2 - Years 2015-2017
Part: A/C controls

To remove the climate control buttons from the Chrysler 200, pry with a tool like a screwdriver at the bottom of the panel to release its internal clips. This will allow you to pull the panel out of its housing and disconnect the connector at the back. Now, connect the new panel with the buttons to that connector, ensuring it is properly seated in place. After installation, make sure all the new buttons function correctly.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
Where to Find the Fuse Box of the Chrysler 200
Where to Find the Fuse Box of the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If you own a second-generation Chrysler 200 and are wondering where the fuse box containing all the various fuses is located, just read this guide an…
How to Reset Uconnect in the Chrysler 200
How to Reset Uconnect in the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) In today's video, we will see how to reset the Uconnect system in the Chrysler 200. This tutorial also applies to other models from the American manu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos