Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5 Aircross
    4. : 2022-2024 (MK 2)

Citroen C5 Aircross Years 2022-2024 (MK 2)

Citroen C5 Aircross (2022-2024 / MK 2)
Resetting the Citroen C5 Aircross MK2 Service light
In this video we see how a reminder appears in the center of the instrument panel to notify us that we are reaching the mileage set for the engine oil change …read all…
Posted on 7 April 2024 by ScegliAuto
Citroen C5 Aircross (2022-2024 / MK 2)
How to deactivate the lane keeping assistant of a Citroen C5 Aircross?
Good morning, today's goal is to go and deactivate the lane keeping assistant of our Citroen C5 Aircross. Let's start by sitting in the driver's seat. Then, we …read all…
Posted on 29 February 2024 by ScegliAuto
Citroen C5 Aircross (2022-2024 / MK 2)
How to reset the tire pressure warning light in the Citroen C5 Aircross?
Resetting the tire pressure warning light in the Citroen C5 Aircross, as we can see in this tutorial, is an extremely simple and quick operation. Before doing …read all…
Posted on 6 February 2024 by ScegliAuto
Citroen C5 Aircross (2022-2024 / MK 2)
How to replace the cabin air filter on the Citroen C5 Aircross.
The replacement of the cabin air filter on a Citroen C5 Aircross follows simple and quick steps that can be done independently, allowing us to save some money. …read all…
Posted on 30 December 2023 by ScegliAuto
Key (1) -board computer (6) Checks and maintenance (7) Air filter (1) Cabin air filter (4) Tires (2) Instrument cluster (4) Fuse box (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos