Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumpy
    4. : 1994-2007 (MK 1)

Citroen Jumpy Years 1994-2007 (MK 1)

Citroen Jumpy (1994-2007 / MK 1)
Where are the fuses located in the Citroën Jumpy?
The fuses of the Citroën Jumpy are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle there are two boxes …read all…
Posted on 6 April 2023 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
How to reset the Citoren Jumpy Service (but also Peugeot Expert and Fiat Scudo)
How to reset the service light on a 1994-2007 Citroen Jumpy (but also Peugeot Expert and Fiat Scudo, the procedure remains the same for these models too). …read all…
Posted on 8 October 2022 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
How to reset the Citroen Jumpy / Fiat Scudo / Peugeot Expert service
To reset the service of a Citroen Jumpy / Fiat Scudo / Peugeot Expert we operate as follows: we turn on the instrument panel and notice that the wrench warning …read all…
Posted on 1 April 2024 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
How to replace the diesel filter on a Citroen Jumpy
Before being able to start, we will have to open the front hood of our Citroen Jumpy. Let's start by disconnecting and moving the sleeves connected to the …read all…
Posted on 16 March 2024 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
How to replace the headlight bulb on the Citroà «n Jumpy?
In order to replace the Citroà «n Jumpy headlight bulb, the hood must be opened to gain access to the engine compartment. In this way it will be possible to …read all…
Posted on 12 March 2024 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
How to reset the service in the Citroen Jumpy van?
Resetting the service notice in the Citroen Jumpy van, an operation to be carried out only after having provided the coupon, is very simple, let's see how in …read all…
Posted on 8 March 2024 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
How do you replace the passenger compartment fan of the Citroà «n Jumpy?
In order to replace the passenger compartment fan of the Citroà «n Jumpy, you must first remove the plastic cover located immediately under the glovebox, on …read all…
Posted on 5 March 2024 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
Citroen Jumpy engine removal
In this video tutorial we will see how to remove the engine entirely in a Citroen Jumpy, but also on other models of the manufacturer. First we lift our car …read all…
Posted on 24 December 2023 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
Citroen Jumpy air suspension installation
Installing an air suspension kit on this practical commercial vehicle will make it easier to load and unload goods since it is possible to adjust the height of …read all…
Posted on 14 September 2023 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
Replacing the cabin air filter
The replacement of the pollen filter of your car is part of the not too complicated replacement operations that with a minimum of attention can also be carried …read all…
Posted on 12 September 2023 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located in the engine compartment, in a central position, immediately under the passenger compartment; once the bonnet …read all…
Posted on 30 August 2023 by ScegliAuto
-board computer (3) Checks and maintenance (10) Cabin air filter (5) Diesel filter (1) Light bulb (1) Engine (1) Engine oil (1) Tires (1) Instrument cluster (2) Fuse box (9) Suspensions (1) Interior blower (1) Steering wheel (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos