Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Citroen C3 Aircross

Model: Citroen C3 Aircross MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Front bumper

See other generations:
Video tutorial

Today's instructions will show you the procedure for removing and replacing the front bumper of the Citroen C3 Aircross. First, open the bonnet of the vehicle and start unscrewing all the fixing screws located on both the upper and lower parts of the front bumper; then unscrew the fixing screws situated on both sides of the wheel arches, as shown in the video.

At this point, gently unclip the bumper from the sides until it is completely removed; then replace it with the new one, securing it correctly by applying the reverse procedure!


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Citroën C3 Aircross?
How to Replace the Cabin Filter on a Citroën C3 Aircross?
Citroen C3 Aircross (2017-2024 / MK 1) To replace the cabin filter on a Citroën C3 Aircross, open the bonnet to access the seal located immediately below the windscreen. Once this seal is …
How do you replace the battery of the Citroën C3 AirCross?
How do you replace the battery of the Citroën C3 AirCross?
Citroen C3 Aircross (2017-2024 / MK 1) To replace the battery of the Citroën C3 AirCross, you will need to open the hood in order to access the components located inside the engine compart…
How do you replace the cabin filter of the Citroën C3 AirCross?
How do you replace the cabin filter of the Citroën C3 AirCross?
Citroen C3 Aircross (2017-2024 / MK 1) To replace the cabin filter of the Citroën C3 Aircross, you need to open the hood so that you can access the engine compartment: in its rear part, ju…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos