Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set up the remote control of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Key

In this video, we see how we can easily reprogram the remote control of a Citroen C3 that had lost its programming. All we have to do is get into the car with the door closed and put the key in the ignition, just to turn on the dashboard. With the key in position, we press the top button of the key for three seconds. Now we remove the key from the ignition and press, again for three seconds, the button located below. After this, we open and close the car door. We can now try our key, which works properly.

Posted on 1 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Repair the Remote Control of the Citroen C3
How to Repair the Remote Control of the Citroen C3
Citroen C3 (2009-2016 / SC) In this video, you will see how to repair the remote control of the second series Citroen C3; you will fix the buttons and the case. Start by reading…
How to Set the Alarm on a Citroen C3
How to Set the Alarm on a Citroen C3
Citroen C3 (2009-2016 / SC) Let's see how to configure the alarm using the remote control of the Citroen C3: sit in the cabin and close the doors, insert the key into the igniti…
How to Program the Remote for a Citroen C3?
How to Program the Remote for a Citroen C3?
Citroen C3 (2009-2016 / SC) To program the remote for a Citroen C3, you do not need any special tools. First, enter the cabin of your vehicle from the driver's side and, after c…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - Why don't the USB sticks on the Citoren C3 work? Read answer
    • C3 2016-2023 - What does the wrench light on my Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos