Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wing on the Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

See other generations:
Video tutorial

Today's main instructions will show you how to remove and replace the front wing on the Citroen C3. First, open the bonnet of the vehicle and the front door; then unscrew all the fastening screws located above the wing, accessing them from the engine bay, and on the front wheel arch, as shown in the video.

At this point, gently detach the front wing to remove it, replacing it with the new one; then install the new wing, securing it properly on the sides and the wheel arch, applying the reverse procedure!


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Wing on the Citroen C3
How to Replace the Wing on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video tutorial, see how to repair the bodywork of a Citroen C3, in this case, the part in question is the wing. Once you have received the wi…
Guide to replacing the timing belt of the Citroen C3 1.4 HDi
Guide to replacing the timing belt of the Citroen C3 1.4 HDi
Citroen C3 (2002-2009 / FC, FN) Below we will see the steps that will show us how to dismantle and replace the timing belt of the Citroen C3 1.4 HDi. First, lift the vehicle and sta…
Replacement of the timing belt of the Citroen C3 1.4 HDI
Replacement of the timing belt of the Citroen C3 1.4 HDI
Citroen C3 (2002-2009 / FC, FN) The main instructions in this guide will show us how to disassemble and replace the timing belt of the Citroen C4 1.4 HDI. First, we open the hood of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos