|
Do it yourself
| |||
| ||||
How to disassemble the front headlight of a Citroen Berlingo
Model: Citroen Berlingo
MK 2
- Years 2008-2018
In this video, we see how to disassemble the front headlight of a Citroen Berlingo: the headlight is attached to the frame with three bolts, one inserted inside the grille, the second inside the turn signal, and the other on the upper side. Disassembling the front grille is easy: just remove the screws by opening the front hood, then there are two screws under the bottom part of the headlight (which can also be easily removed with hands), and then we have a screw under the Citroen emblem, which is really difficult to remove. Removing the turn signal is very simple: just pull towards us and remove the electrical connector. After removing the three bolts, the headlight comes off easily, just remember to remove the electrical connector.
Posted on 30 November 2024 by ScegliAuto
Video tutorial
Related tutorials
Citroen Berlingo
(1996-2013 /
MK 1)
In this guide, we will see the instructions to remove and replace the front indicator light on the Citroen Berlingo. First, open the vehicle's bonnet…
Citroen Berlingo
(2008-2018 /
MK 2)
Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
Citroen Berlingo
(2008-2018 /
MK 2)
Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
