Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

Want to remove the front headlight on a Citroen Berlingo? Here’s how to proceed with the removal. Open the bonnet by pulling the lever and secure it. Unscrew the fastening pins of the central grille and remove it. Unscrew the pins located above the headlight using a socket wrench or battery-powered screwdriver.

At this point, you will find additional pins on the side of the headlight: unscrew them. Disconnect the bulb holder from the headlight and extract the headlight from the vehicle body.

Install the new headlight with new bulbs if damaged (ensure they are the correct type and size) and insert the headlight into its housing. Finally, tighten the pins above the headlight.

Test the lights for proper operation.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
How to Change the Headlight Bulbs on the Citroen Berlingo 2
How to Change the Headlight Bulbs on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…
How to replace the front headlight bulb of the Citroen Berlingo
How to replace the front headlight bulb of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) The following instructions will allow us to disassemble and replace the headlight bulb of the Citroen Berlingo. First, we open the hood of the car an…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos