Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to remove the headlight of the Citroen Berlingo

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Headlight
Operation: How to remove the headlight of the Citroen Berlingo

Today we will explain how to remove the right front headlight of the Citroen Berlingo. This operation can be easily performed independently. To remove the headlight, we first need to remove the plastic located underneath it, to do this you just need to unhook it with a lever tool. Once the plastic is removed, we can open the front hood and immediately disconnect the headlight bulb connector from the inside. Once the connector is disconnected, we can unscrew the tightening screws of the headlight. After removing the screws, we can extract the headlight from its housing, to remove the left headlight, follow the same steps.


Posted on 5 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos